Description
Product descriptions from the supplier
| Description | |
| Specification | 6530 |
| Printer Mode | Intermittent and Continuous Motion |
| Print Gap | Consistent 0.020″ (0.5mm) |
| Ribbon Widths | 6530 (53mm): 0.8” (20mm), |
| 2.2” (55mm) max | |
| 6530 (107mm): 2.2” (55mm), | |
| 4.33” (110mm) max | |
| Bar Code Printing | EAN 8, EAN 13, UPC-A, UPC-E, Code 39, EAN 128, Code 128, ITF, RSS (including 2D composite codes); others may be available upon request |
| Operator Interface | TFT SVGA 800×480 full-color LCD and touch screen, WYSIWYG print preview, full on-board diagnostics, 3 levels of password protection, extensive language support |
| Leader/Follower Capability (Up to 4 Printers Controlled by One User Interface) | Up to four Videojet DataFlex® 6530 printers controlled via a single CLARiTY™ control unit |
| Standard Communication | RS232, dual Ethernet, USB memory stick and scanner support, Binary and ASCII comms protocols, Windows™ drivers ZPL and SATO emulations |
| Web Browser Capability | Yes |
| Continuous Mode: | – |
| Maximum Print Area | 6530(53mm): 2.1” (53mm) wide x 11.8” (300mm) long |
| (Width x Length) | 6530 (107mm): 4.3” (107mm) wide x 11.8” (300mm) long |
| Maximum Print Speed | 39.4 in./sec (1,000mm/sec) |
| Minimum Print Speed | 0.04 in./sec (1mm/sec) |
| Estimated Maximum Throughput (Single Line Code) | 6530 (53mm): Up to 700 prints per minute |
| 6530 (107mm): Up to 450 prints per minute | |
| Intermittent Mode: | – |
| Maximum Print Area | 6530 (53mm): 2.1” (53mm) wide x 2.95” (75mm) long |
| (Width x Length) | 6530 (107mm): 4.3” (107mm) wide x 2.95” (75mm) long |
| Maximum Print Speed | 6530 (53mm): 31.5 in./sec (800mm/sec) |
| 6530 (107mm): 23.6in./sec (600mm/sec) | |
| Minimum Print Speed | 0.4 in./sec (10mm/sec) |
Type: Printhead
Brand:Videojet
Model:Videojet 6530-107mm LINX-TT1000-107mm Printer
The print head is the most fragile and fragile device in a printer. It is a consumable product like a car and will eventually be damaged Careful maintenance can extend the life of the print head.
For best results, clean the print head every time you use a roll of ribbon or a roll of thermal paper.
Note when cleaning the print head Take off the ring to prevent the print head from being scratched, and use a grounded metal strap or anti-static pad to prevent the print head from being damaged by static electricity.
You can use a cotton swab soaked in 70% alcohol, first turn off the printer and turn on the print head.
Use a small amount of cotton cloth to brush the mechanical part of the printer, or gently blow away dust (such as: rollers, paper tape sensors and print heads). Do not use any hard metal or abrasive tools (such as screwdrivers) to grind the contamination of the print head.
Use a cotton swab with alcohol to press it on the print head and wipe it from the bottom to the bottom. Then rotate the roller and wipe it with the roller. Do not use the cotton swab when it is dirty.
Factors that cause premature damage to the print head Scratching-Long-term movement of the label tape through the print head will wear away the protective layer of the ceramic coating, causing the print head pins (dots) to be exposed and eventually damaged.
- Clean the print head frequently and use a high-quality, smooth, back-coated thermal transfer ribbon to reduce friction.
- Minimize print head pressure and print temperature.
- Make sure the ribbon width is wider than the label to prevent the exposed print head from being scratched by the label.
