Product Type: HPRT Label Printer Mechanisms
Brand:HPRT
Product model:PM251 (2 inches)
Product package quantity:1
Description
Print PM251
medium detect
Mode line thermal printing
Point density 8 points/mm
Maximum print width 48 mm
Maximum print speed 80 mm/s
Type paper
The paper width is 58 mm
The inner diameter of the roll is 10 mm
Roll outer diameter 50 mm
Thickness 55 microns ~85 microns
Manual paper cutter
Hot write head temperature thermistor
Paper deficiency detection Photoelectric detection
Drive voltage 8.5V+10%,2A
Literal numbers ASCI1 8*16,12*24
specification
([PC437 (UsA:Standard Europe)l.[is08859-15 (Latin9)1[Katakanal.[WPC12501.[Pc850 (Multilingualy1.[WPC1251(Cyrillic)],[Pc860 (Portuguese)],[wPC1253],[PC863
(Canadian-French)1.[WPc12541,[PC865 (Nordic)1.[WPC1255] [PC857(Turiish)1.[wPc12561,Pc737 Greek1.WPC12571.
typeface
Page codes [1s08859-7Greek)1,[WPC1258],[WPC1252],MK[Cyrillic/Bulgarian],[Pc866 (Cyrillic
#2)1.CP755 [EastEurope 1,
ILatvian21,[Pc852 (latin 2)1, firanl.(Pc858 (Euro)l.(lran ll.(KU42).latvianl ITlS11
(Thai)],1s0-8859-1[WestEurope],[Tis18 (Thai].Is0- 8859-3[Latin3].[PC720]].
Is0-8859-4Balticl.wPc7751.1s0-8859-5[0yrillic].[PC855 (Cyrillic)].1s0-8859-6[Arabic], [Pc862 (Hebrew)].
IS0-8859-8[Hebrew1.[PC864] Bar code
ID UPCAUPCE, EANUJAN)18,EANUAN)13,CODE39,ITF,CODEBAR,CODE128,.CODE93
2D OR Code
Programming language ESC/POS
Drive Windows 2000, xp, Vista. 7.8.10. Server 2008.2012 CUPS for Linux. MMAC
Environmental parameter
Operating conditions -10C~50℃, 10%~95%RH
Storage conditions -40C~50 C, 5%~95%RH
Mechanical wear resistance 50 km
Dimensions (W x D x H) 89x89x55 mm
Precautions for use
1 The printer should be installed in a flat, stable place;
2 Avoid placing the printer in places with vibration and impact;
3 Leave enough space around the printer for operation and maintenance;
4 The printer should be away from water and avoid direct sunlight, strong light and heat sources;
5 Do not use and store the printer in places with high temperature, high humidity and serious pollution;
6 If you do not use the printer for a long time, disconnect the power supply of the printer.
7 The printer must not print in a paperless state, otherwise it will seriously damage the print head;
8 In order to ensure print quality and product life, it is recommended to use recommended or equivalent quality paper;
9 In the case of meeting the requirements of use, it is recommended to set a low level of printing concentration as far as possible, so as not to affect the service life of the print head;
10 Do not allow moist air condensation on the surface of the printer, if it has formed, do not turn on the power of the printer before the dew is eliminated;
11 Avoid water or conductive substances (such as metal) entering the printer, once it occurs, the power should be turned off immediately;
12 When plugging or disconnecting each interface, the power supply must be turned off, otherwise it may cause damage to the printer control circuit;
13 Do not disassemble the printer for maintenance.
